A
-
Abbassi-Sourki, Foroud
Development of a New Model Based on Ogden-Roxburgh Model for the Prediction of the Stress-Softening Behavior of Carbon Black-Filled Rubber Compounds [Volume 35, Issue 1, 2022, Pages 67-80]
-
Abbassi-Sourki, Foroud
Study on the Effectiveness of Some Multicomponent Material Models with Hyper-viscoelasticity and Stress Softening for SBR/Carbon Black Compounds under two Loading Modes [Volume 35, Issue 6, 2023, Pages 555-564]
-
Aghdasinia, Hassan
Synthesis and Performance Evaluation of Carboxymethyl Cellulose Nanocomposite Hydrogel Adsorbent Grafted with Acrylic Acid and Itaconic Acid Copolymer Containing Carbon Black Nanoparticles for Fuchsin Removal [Volume 35, Issue 1, 2022, Pages 39-51]
-
Ahmadi, Ashraf
Fabrication of Thin Film Heterogeneous Cation Exchange Membrane in Chitosan Nanocomposite Layer with Copper Oxide Nanoparticles [Volume 35, Issue 3, 2022, Pages 281-291]
-
Akbari Taemeh, Mahdokht
Studies on Sulfate Group Substitution on Sodium Sulfated Alginate Electrospinning [Volume 35, Issue 3, 2022, Pages 215-231]
-
Akrami, Hamidreza
Experimental Comparison of the Effect of Microtalc and Nanoclay on the Structural Properties of Polyethylene Foams Fabricated by Rotational Molding [Volume 35, Issue 1, 2022, Pages 81-90]
-
Alimardani, Mohammad
Comparative Performance and Modification of Rubber and Reinforcing-Filler on the Tearing Resistance of Peroxide-Cured Natural-Rubber/Silica Compounds [Volume 35, Issue 5, 2023, Pages 487-500]
-
Amani-Tehran, Mohammad
Estimation and Optimization of Physical Properties of Electrospun PLGA Nanofibrous Mat [Volume 35, Issue 2, 2022, Pages 127-138]
-
Amirabedi, Parya
Reducing the Wettability of Porous Polymeric Membranes in Membrane Contactors: An Overview on the Methods and Their Effective Parameters [Volume 35, Issue 3, 2022, Pages 181-200]
-
Anvarsalar, Adelee
Fabrication of Antibacterial Mixed matrix Membranes Using zinc Oxide and Copper Oxide Nanoparticles and ZnO/CuO Nanocomposite [Volume 35, Issue 1, 2022, Pages 25-38]
-
Arab, Kosar
Sulfonated Poly(ether ether ketone) and Organically Modified Montmorillonite Nanocomposite Membranes for Direct Methanol Fuel Cell [Volume 35, Issue 4, 2023, Pages 353-366]
-
Arsalani, Naser
Synthesis and Performance Evaluation of Carboxymethyl Cellulose Nanocomposite Hydrogel Adsorbent Grafted with Acrylic Acid and Itaconic Acid Copolymer Containing Carbon Black Nanoparticles for Fuchsin Removal [Volume 35, Issue 1, 2022, Pages 39-51]
-
Asadolahi, Mehrdad
Surface Modification of Electrospun Poly(vinylidene fluoride) Membrane by Low-Pressure Plasma Polymerization to Improve Long-Term Membrane Performance in Water Desalination Process Based on Air Gap Membrane Distillation Method [Volume 35, Issue 2, 2022, Pages 151-162]
-
Asefnejad, Azadeh
Fabrication and characterization of nanofibrous scaffold based on chitosan containing cerium oxide nanoparticles for wound healing application [Volume 35, Issue 6, 2023, Pages 565-580]
-
Azadbakht, Kimiya
Fabrication and characterization of nanofibrous scaffold based on chitosan containing cerium oxide nanoparticles for wound healing application [Volume 35, Issue 6, 2023, Pages 565-580]
-
Azdast, Taher
Experimental Comparison of the Effect of Microtalc and Nanoclay on the Structural Properties of Polyethylene Foams Fabricated by Rotational Molding [Volume 35, Issue 1, 2022, Pages 81-90]
-
Azizi, Maryam
Effect of Plasma on Polyethylene by Positron Lifetime Spectroscopy [Volume 35, Issue 4, 2023, Pages 381-391]
B
-
Baghban Salehi, Mahsa
Synthesis of Cobalt nanocomposite hydrogel based on Acrylamide as an efficient chemical for sand control in the oil reservoir [Volume 35, Issue 6, 2023, Pages 529-540]
-
Bakeri, Gholamreza
Fabrication of Antibacterial Mixed matrix Membranes Using zinc Oxide and Copper Oxide Nanoparticles and ZnO/CuO Nanocomposite [Volume 35, Issue 1, 2022, Pages 25-38]
-
Bakhtiari Ramezani, Mahdieh
Effect of Plasma on Polyethylene by Positron Lifetime Spectroscopy [Volume 35, Issue 4, 2023, Pages 381-391]
-
Bandehali, Samaneh
Surface Modification of Polyethersulfone-Based Nanofiltration Membrane Using Carboxylated Graphene Oxide and Polyethyleneimine [Volume 35, Issue 5, 2023, Pages 501-513]
D
-
Daemi, Hamed
Studies on Sulfate Group Substitution on Sodium Sulfated Alginate Electrospinning [Volume 35, Issue 3, 2022, Pages 215-231]
-
Derakhshan fard, Fahime
Modeling and Optimization of Cefixime Removal from Aqueous Solutions by Poly(vinylidene fluoride)/Graphitic Carbon Nitride/Chitosan Membrane Using Response Surface Methodology [Volume 35, Issue 2, 2022, Pages 139-149]
-
Doniavi, Ali
Experimental Comparison of the Effect of Microtalc and Nanoclay on the Structural Properties of Polyethylene Foams Fabricated by Rotational Molding [Volume 35, Issue 1, 2022, Pages 81-90]
E
-
Ehsani Namin, Parvin
Investigating the effect of graphene oxide nanosheets on the barrier properties of high density polyethylene coated by layer-by-layer assembly method [Volume 35, Issue 6, 2023, Pages 581-594]
-
Ershad, Amir
Design and Fabrication of Polyurethane Foams Modified with Rock Wool Fiber: The Effect of Reinforcement Amount on Acoustical and Mechanical Properties [Volume 35, Issue 2, 2022, Pages 97-109]
-
Eskandari, Maryam
Surface Modification of Polyethersulfone-Based Nanofiltration Membrane Using Carboxylated Graphene Oxide and Polyethyleneimine [Volume 35, Issue 5, 2023, Pages 501-513]
F
-
Fashandi, Hossein
Surface Modification of Electrospun Poly(vinylidene fluoride) Membrane by Low-Pressure Plasma Polymerization to Improve Long-Term Membrane Performance in Water Desalination Process Based on Air Gap Membrane Distillation Method [Volume 35, Issue 2, 2022, Pages 151-162]
-
Fattahi, Hassan
Synthesis and Characterization of 4,4'-Bis(maleimido)diphenylmethane Resin and Evaluation of Its Curing Behavior in Blending with Epoxy [Volume 35, Issue 4, 2023, Pages 339-352]
G
-
Ghahramani, Maral
Effect of Polyurethane Substrate Morphology on Gas Permeation Properties of Poly(dimethyl siloxane) Block Copolymer/Polyurethane Layered Membranes [Volume 35, Issue 3, 2022, Pages 257-279]
-
Gharbani, Parvin
Modeling and Optimization of Cefixime Removal from Aqueous Solutions by Poly(vinylidene fluoride)/Graphitic Carbon Nitride/Chitosan Membrane Using Response Surface Methodology [Volume 35, Issue 2, 2022, Pages 139-149]
-
Ghasemi, Ismaeil
Investigating the effect of graphene oxide nanosheets on the barrier properties of high density polyethylene coated by layer-by-layer assembly method [Volume 35, Issue 6, 2023, Pages 581-594]
-
Gholipour-Kanani, Adeleh
Fabrication and characterization of nanofibrous scaffold based on chitosan containing cerium oxide nanoparticles for wound healing application [Volume 35, Issue 6, 2023, Pages 565-580]
-
Ghorashi, Mahaan
Comparative Performance and Modification of Rubber and Reinforcing-Filler on the Tearing Resistance of Peroxide-Cured Natural-Rubber/Silica Compounds [Volume 35, Issue 5, 2023, Pages 487-500]
-
Ghoreishy, Mir Hamid Reza
Development of a New Model Based on Ogden-Roxburgh Model for the Prediction of the Stress-Softening Behavior of Carbon Black-Filled Rubber Compounds [Volume 35, Issue 1, 2022, Pages 67-80]
-
Ghoreishy, Mir Hamid Reza
Study on the Effectiveness of Some Multicomponent Material Models with Hyper-viscoelasticity and Stress Softening for SBR/Carbon Black Compounds under two Loading Modes [Volume 35, Issue 6, 2023, Pages 555-564]
H
-
Haji Abdolrasouli, Mehdi
Poly(lactic acid)/Polycaprolactone/Graphene Bionanocomposites: Microstructural, Mechanical and Thermal Properties [Volume 35, Issue 5, 2023, Pages 469-486]
-
Hakim, shokoufeh
Synthesis of Isotactic Polybutene-1 with Ziegler-Natta Catalyst [Volume 35, Issue 2, 2022, Pages 163-174]
-
Hakim, Shokoufeh
Castor Oil-Based Waterborne Polyurethanes: An Overview [Volume 35, Issue 4, 2023, Pages 299-338]
-
Hasanzade, Parya
Modeling and Optimization of Cefixime Removal from Aqueous Solutions by Poly(vinylidene fluoride)/Graphitic Carbon Nitride/Chitosan Membrane Using Response Surface Methodology [Volume 35, Issue 2, 2022, Pages 139-149]
-
Hasanzadeh, Rezgar
Experimental Comparison of the Effect of Microtalc and Nanoclay on the Structural Properties of Polyethylene Foams Fabricated by Rotational Molding [Volume 35, Issue 1, 2022, Pages 81-90]
-
Hatami, mehdi
Modification of Polysulfone Hollow Fiber Membrane Inner Surface with Polydopamine Coating Treatment [Volume 35, Issue 1, 2022, Pages 53-67]
-
Heyran Kahnamuei, Farnaz
Design and Fabrication of Polyurethane Foams Modified with Rock Wool Fiber: The Effect of Reinforcement Amount on Acoustical and Mechanical Properties [Volume 35, Issue 2, 2022, Pages 97-109]
-
Hezarjaribi, Masoumeh
Fabrication of Antibacterial Mixed matrix Membranes Using zinc Oxide and Copper Oxide Nanoparticles and ZnO/CuO Nanocomposite [Volume 35, Issue 1, 2022, Pages 25-38]
-
Honarkar, Hengameh
Synthesis of Isotactic Polybutene-1 with Ziegler-Natta Catalyst [Volume 35, Issue 2, 2022, Pages 163-174]
-
Honarkar, Hengameh
Castor Oil-Based Waterborne Polyurethanes: An Overview [Volume 35, Issue 4, 2023, Pages 299-338]
-
Hosseini, SayedMohsen
Fabrication of Thin Film Heterogeneous Cation Exchange Membrane in Chitosan Nanocomposite Layer with Copper Oxide Nanoparticles [Volume 35, Issue 3, 2022, Pages 281-291]
-
Hosseini, seyed abdolkarim
Production and Characterization of Nanofibrous Yarn Containing Lignin and Feasibility Study of Its Use as a Drug Eluting Suture [Volume 35, Issue 2, 2022, Pages 111-125]
-
Hosseini, Seyed Mostaffa
Comparative Performance and Modification of Rubber and Reinforcing-Filler on the Tearing Resistance of Peroxide-Cured Natural-Rubber/Silica Compounds [Volume 35, Issue 5, 2023, Pages 487-500]
I
-
Isvand Rajabi, Shahrzad
Removal of Methyl Orange Dye from Aqueous Solution Using Bioadsorbent Modified with Polyaniline Nanofibers;
Isotherm, Kinetic and Thermodynamic Studies [Volume 35, Issue 5, 2023, Pages 435-453]
J
-
Jalili, Kiyumars
Superhydrophobic Polydimethysiloxane Coatings Prepared by the in Situ Growth of Silicone Nanofilaments on a Sanded Substrate [Volume 35, Issue 6, 2023, Pages 541-554]
-
Jamalpour, Seifollah
Sulfonated Poly(ether ether ketone) and Organically Modified Montmorillonite Nanocomposite Membranes for Direct Methanol Fuel Cell [Volume 35, Issue 4, 2023, Pages 353-366]
-
Jamshidi, Hajar
Castor Oil-Based Waterborne Polyurethanes: An Overview [Volume 35, Issue 4, 2023, Pages 299-338]
-
Javid, Mahsa
Investigating the effect of graphene oxide nanosheets on the barrier properties of high density polyethylene coated by layer-by-layer assembly method [Volume 35, Issue 6, 2023, Pages 581-594]
-
Jozaghkar, Mohammadreza
Effect of Reaction Temperature on Tacticity in Polymerization of Methyl Methacrylate: A Study by Nuclear Magnetic Resonance Spectroscopy [Volume 35, Issue 4, 2023, Pages 393-404]
K
-
Kalaee, Mohammad Reza
Physical and Mechanical Properties of Electrospun PLA Nanofibers in the Presence of Silicone Rubber Nanoparticles [Volume 35, Issue 5, 2023, Pages 455-468]
-
Karimzadeh, Saeed
Experimental Comparison of the Effect of Microtalc and Nanoclay on the Structural Properties of Polyethylene Foams Fabricated by Rotational Molding [Volume 35, Issue 1, 2022, Pages 81-90]
-
Khademzadeh Yeganeh, Jafar
Physical and Mechanical Properties of Electrospun PLA Nanofibers in the Presence of Silicone Rubber Nanoparticles [Volume 35, Issue 5, 2023, Pages 455-468]
L
-
Latifi, Masoud
Estimation and Optimization of Physical Properties of Electrospun PLGA Nanofibrous Mat [Volume 35, Issue 2, 2022, Pages 127-138]
M
-
Mahdavi Moghadam, Zahra Sadat
Physical and Mechanical Properties of Electrospun PLA Nanofibers in the Presence of Silicone Rubber Nanoparticles [Volume 35, Issue 5, 2023, Pages 455-468]
-
Masdarolomoor, Fatemeh
Removal of Methyl Orange Dye from Aqueous Solution Using Bioadsorbent Modified with Polyaniline Nanofibers;
Isotherm, Kinetic and Thermodynamic Studies [Volume 35, Issue 5, 2023, Pages 435-453]
-
Mashayekhi, Maryam
Studies on Sulfate Group Substitution on Sodium Sulfated Alginate Electrospinning [Volume 35, Issue 3, 2022, Pages 215-231]
-
Mashhadi Farahani, Mina
Castor Oil-Based Waterborne Polyurethanes: An Overview [Volume 35, Issue 4, 2023, Pages 299-338]
-
Mazinani, Saeedeh
Physical and Mechanical Properties of Electrospun PLA Nanofibers in the Presence of Silicone Rubber Nanoparticles [Volume 35, Issue 5, 2023, Pages 455-468]
-
Mehdipour-Ataei, shahram
Effect of Reaction Temperature on Tacticity in Polymerization of Methyl Methacrylate: A Study by Nuclear Magnetic Resonance Spectroscopy [Volume 35, Issue 4, 2023, Pages 393-404]
-
Mehdipour-Ataei, Shahram
A Review on Role and Characteristics of Polymeric Membrane in Vanadium Redox Flow Battery [Volume 35, Issue 5, 2023, Pages 411-434]
-
Memar Maher, Behnaz
Modeling and Optimization of Cefixime Removal from Aqueous Solutions by Poly(vinylidene fluoride)/Graphitic Carbon Nitride/Chitosan Membrane Using Response Surface Methodology [Volume 35, Issue 2, 2022, Pages 139-149]
-
Mirzai, Mohammad Ali
Poly(lactic acid)/Polycaprolactone/Graphene Bionanocomposites: Microstructural, Mechanical and Thermal Properties [Volume 35, Issue 5, 2023, Pages 469-486]
-
Moghadassi, Abdolreza
Surface Modification of Polyethersulfone-Based Nanofiltration Membrane Using Carboxylated Graphene Oxide and Polyethyleneimine [Volume 35, Issue 5, 2023, Pages 501-513]
-
Mohammadi, Abbas
Antibacterial Coatings Based on Waterborne Polyurethanes: A Review on Synthesis Methods, Properties and Applications [Volume 35, Issue 1, 2022, Pages 3-23]
-
Mohammadi, Maryam
A Review on Role and Characteristics of Polymeric Membrane in Vanadium Redox Flow Battery [Volume 35, Issue 5, 2023, Pages 411-434]
-
Mohammadzadeh Pakdel, Parisa
Synthesis and Performance Evaluation of Carboxymethyl Cellulose Nanocomposite Hydrogel Adsorbent Grafted with Acrylic Acid and Itaconic Acid Copolymer Containing Carbon Black Nanoparticles for Fuchsin Removal [Volume 35, Issue 1, 2022, Pages 39-51]
-
Mohammdi, Behzad
Design and Fabrication of Polyurethane Foams Modified with Rock Wool Fiber: The Effect of Reinforcement Amount on Acoustical and Mechanical Properties [Volume 35, Issue 2, 2022, Pages 97-109]
-
Moradi, Gholamreza
Design and Fabrication of Polyurethane Foams Modified with Rock Wool Fiber: The Effect of Reinforcement Amount on Acoustical and Mechanical Properties [Volume 35, Issue 2, 2022, Pages 97-109]
-
Mortezaei, Mehrzad
Synthesis and Characterization of 4,4'-Bis(maleimido)diphenylmethane Resin and Evaluation of Its Curing Behavior in Blending with Epoxy [Volume 35, Issue 4, 2023, Pages 339-352]
N
-
Najafi, Hossein
Superhydrophobic Polydimethysiloxane Coatings Prepared by the in Situ Growth of Silicone Nanofilaments on a Sanded Substrate [Volume 35, Issue 6, 2023, Pages 541-554]
-
Nekomanesh, Mehdi
Synthesis of Isotactic Polybutene-1 with Ziegler-Natta Catalyst [Volume 35, Issue 2, 2022, Pages 163-174]
-
Nohekhan, Mojtaba
Effect of Plasma on Polyethylene by Positron Lifetime Spectroscopy [Volume 35, Issue 4, 2023, Pages 381-391]
P
-
Payamani, Mahdi
Synthesis and Characterization of 4,4'-Bis(maleimido)diphenylmethane Resin and Evaluation of Its Curing Behavior in Blending with Epoxy [Volume 35, Issue 4, 2023, Pages 339-352]
-
Peighambardoust, Seyed Jamaleddin
Synthesis and Performance Evaluation of Carboxymethyl Cellulose Nanocomposite Hydrogel Adsorbent Grafted with Acrylic Acid and Itaconic Acid Copolymer Containing Carbon Black Nanoparticles for Fuchsin Removal [Volume 35, Issue 1, 2022, Pages 39-51]
-
Pourmahdian, Saeed
Non-Chemical Routes to Tailor Polymer Polydispersity, Activity and Fragmentation Mechanism of ZN Catalytic Systems in Heterogeneous Propylene Polymerization [Volume 35, Issue 3, 2022, Pages 233-255]
R
-
Rabiei karahroudi, Narjes
Fabrication of Thin Film Heterogeneous Cation Exchange Membrane in Chitosan Nanocomposite Layer with Copper Oxide Nanoparticles [Volume 35, Issue 3, 2022, Pages 281-291]
-
Rafiei, Monireh
Fabrication of Thin Film Heterogeneous Cation Exchange Membrane in Chitosan Nanocomposite Layer with Copper Oxide Nanoparticles [Volume 35, Issue 3, 2022, Pages 281-291]
-
Ranjbar-Mohammadi, Marziyeh
Gelatin/Polycaprolactone and Polyvinyl Alcohol/Chitosan Hybrid Nanofibers: Determining Factors on Their Morphology [Volume 35, Issue 3, 2022, Pages 201-214]
-
Raveshiyan, Saba
Reducing the Wettability of Porous Polymeric Membranes in Membrane Contactors: An Overview on the Methods and Their Effective Parameters [Volume 35, Issue 3, 2022, Pages 181-200]
S
-
S.A., Hassanzadeh-Tabrizi
Fabrication of CoCr2O4 nanoparticles using polyacrylamide gel polymer template [Volume 35, Issue 6, 2023, Pages 519-527]
-
Saghafi, Reza
Modification of Polysulfone Hollow Fiber Membrane Inner Surface with Polydopamine Coating Treatment [Volume 35, Issue 1, 2022, Pages 53-67]
-
Saghandali, Farzin
Synthesis of Cobalt nanocomposite hydrogel based on Acrylamide as an efficient chemical for sand control in the oil reservoir [Volume 35, Issue 6, 2023, Pages 529-540]
-
Samadi Maybodi, Abdolraouf
Fabrication of Antibacterial Mixed matrix Membranes Using zinc Oxide and Copper Oxide Nanoparticles and ZnO/CuO Nanocomposite [Volume 35, Issue 1, 2022, Pages 25-38]
-
Sanaei, Leila
Efficiency of Magnetic Granular Adsorbent Based on Natural Zeolite/Chitosan in Removing Arsenic from Polluted Water [Volume 35, Issue 4, 2023, Pages 367-379]
-
Sepehrian Azar, Amir
Effect of Reaction Temperature on Tacticity in Polymerization of Methyl Methacrylate: A Study by Nuclear Magnetic Resonance Spectroscopy [Volume 35, Issue 4, 2023, Pages 393-404]
-
Sharghi, Ehsan
Investigating the effect of graphene oxide nanosheets on the barrier properties of high density polyethylene coated by layer-by-layer assembly method [Volume 35, Issue 6, 2023, Pages 581-594]
-
Shiravandi, Ayoub
Studies on Sulfate Group Substitution on Sodium Sulfated Alginate Electrospinning [Volume 35, Issue 3, 2022, Pages 215-231]
-
Solhi, Sadra
Fabrication of Thin Film Heterogeneous Cation Exchange Membrane in Chitosan Nanocomposite Layer with Copper Oxide Nanoparticles [Volume 35, Issue 3, 2022, Pages 281-291]
T
-
Taghikhani, Vahid
Synthesis of Cobalt nanocomposite hydrogel based on Acrylamide as an efficient chemical for sand control in the oil reservoir [Volume 35, Issue 6, 2023, Pages 529-540]
-
Tajdar, Farideh
Gelatin/Polycaprolactone and Polyvinyl Alcohol/Chitosan Hybrid Nanofibers: Determining Factors on Their Morphology [Volume 35, Issue 3, 2022, Pages 201-214]
-
Tohidian, Mahdi
Sulfonated Poly(ether ether ketone) and Organically Modified Montmorillonite Nanocomposite Membranes for Direct Methanol Fuel Cell [Volume 35, Issue 4, 2023, Pages 353-366]
-
Tohidian, Mobina
Sulfonated Poly(ether ether ketone) and Organically Modified Montmorillonite Nanocomposite Membranes for Direct Methanol Fuel Cell [Volume 35, Issue 4, 2023, Pages 353-366]
V
-
Valipouri, Afsaneh
Production and Characterization of Nanofibrous Yarn Containing Lignin and Feasibility Study of Its Use as a Drug Eluting Suture [Volume 35, Issue 2, 2022, Pages 111-125]
-
Valizadeh, Shahin
Superhydrophobic Polydimethysiloxane Coatings Prepared by the in Situ Growth of Silicone Nanofilaments on a Sanded Substrate [Volume 35, Issue 6, 2023, Pages 541-554]
Y
-
Yahaghi, Effat
Effect of Plasma on Polyethylene by Positron Lifetime Spectroscopy [Volume 35, Issue 4, 2023, Pages 381-391]
-
Yazdanpanah, Mohammadreza
Modification of Polysulfone Hollow Fiber Membrane Inner Surface with Polydopamine Coating Treatment [Volume 35, Issue 1, 2022, Pages 53-67]
-
Yegani, Reza
Reducing the Wettability of Porous Polymeric Membranes in Membrane Contactors: An Overview on the Methods and Their Effective Parameters [Volume 35, Issue 3, 2022, Pages 181-200]
Z
-
Zamani, Fatemeh
Estimation and Optimization of Physical Properties of Electrospun PLGA Nanofibrous Mat [Volume 35, Issue 2, 2022, Pages 127-138]
-
Ziaee, Farshid
Effect of Reaction Temperature on Tacticity in Polymerization of Methyl Methacrylate: A Study by Nuclear Magnetic Resonance Spectroscopy [Volume 35, Issue 4, 2023, Pages 393-404]
-
Ziyaei, Hogatallah
Poly(lactic acid)/Polycaprolactone/Graphene Bionanocomposites: Microstructural, Mechanical and Thermal Properties [Volume 35, Issue 5, 2023, Pages 469-486]
Your query does not match with any item